Europe Audio Diffusion

Préamplificateur PH6


As the analog renaissance shows no signs of diminishing, the PH6 opens the door to truly high performance analog music playback in a price range that is within reach of many music lovers. The PH6 is a hybrid phono stage with a low-noise, high-gain JFET input stage with constant current stabilization and no overall feedback. Unlike its predecessors, the PH6 incorporates two high current 6H30 twin triodes in the gain and output stages; you can expect over 4,000 hours from the PH6’s tube set. Total gain is 58dB, more than sufficient for low output moving coil cartridges when it is partnered with an appropriate line stage.  Bandwidth is an incredible <0.5Hz to 400kHz (-3dB).


Réponse en fréquence :
±0.2dB de RIAA, 10Hz à 60kHz; 3dB points below 0.5Hz and above 400kHz.

Distorsion :
Inférieur à .005% à .50V RMS 1kHz output. GAIN : 58dB at 1kHz (MC & MM compatible).

Commandes :
Power, Muet, Mono, Load

Entrée Impédance :
Sélectionnable 47K, 1000, 500, 200, ou 100 ohms avec 200pF asymétrique

Sortie Impédance :
200 ohms asymétrique. Charge recommandée 50K-100K ohms et 100 pF. (10K ohms minimum et maximum 2000pF.)

Sortie Polarité :

Entrée Maximum :
70mV RMS à 1kHz (180mV RMS à 10kHz).

Niveau de Sortie  :
.50V RMS 10Hz à 60kHz, 100K ohm load (output capability is 50V RMS output at 0.5% THD at 1kHz).

Alimentation :
Electronically-regulated low and high voltage supplies. Line regulation better than .01%.

Bruit :
0.15uV equivalent input noise, IHF weighted, shorted input (76 dB below 1mV 1kHz input).

Tube :
(2) 6H30 dual triodes with JFET input. Solid state power supply.

Alimentation Requise :
100-135VAC 60Hz (200 - 270VAC 50/60Hz) 50 watts maximum. Line fuse 2A slo-blo (1A slo blo 230V). 0.3 watts standby.

Dimensions (LxHxP) :
47 cm x 13,2 cm x 25,4 cm. Les raccords de châssis arrière s'étendent de 1,5 cm

Poids :
5,1 kg Net - 8,6 kg Emballé